3.5RL V6-3474cc 3.5L (2001)
Install the timing belt and balancer belt in the reverse of removal; only key points are described here.
CAUTION: Do not rotate the crankshaft pulley or cam pulleys with the timing belt removed. The pistons it the valves and cause damage.
NOTE: When installing only the balancer belt, go to step 12.
1. Remove the spark plugs.
2. Remove the balancer belt drive pulley and timing belt guide plate.
3. Set the timing belt drive pulley so that the No. 1 piston is at Top Dead Center (TDC). Align the TDC mark on the timing belt drive pulley with the
pointer on the oil pump.