3.5RL V6-3474cc 3.5L (2001)
4. Measure the resistance between the No. 3 and No. 4 terminals of the shift solenoid valve/A/T clutch pressure control solenoid valve harness
connector.
STANDARD: 4.0 - 6.0 Ohms (at 70°F, 20°C)
-
If the resistance is within specification, replace the transmission sub-harness.
-
If the resistance is out of specification, replace the A/T clutch pressure control solenoid valve.
5. If the resistance is within the standard, connect the No. 4 terminal of the shift solenoid valve/A/T clutch pressure control solenoid harness
connector to the battery positive terminal, and connect the No. 3 terminal to the battery negative terminal. A clicking sound should be heard. If no
clicking sound is heard, replace the A/T clutch pressure control solenoid valve.
NOTE: If A/T clutch pressure control solenoid valve replacement is required, see these headings:
-
Lower Valve Body
Removal/Installation
Disassembly/Reassembly
-
Throttle Valve Body/A/T Clutch Pressure Control
Solenoid Valve