3.5RL V6-3474cc 3.5L (2001)
1. Install the damper unit on a spring compressor.
NOTE: Align the bottom of damper spring and spring lower seat as shown.
2. Position the damper mounting base on the damper unit as shown.
3. Compress the damper spring with the spring compressor.
4. Install the damper mounting washer, then loosely install a new self-locking nut.
5. Hold the damper shaft with a hex wrench, and tighten the self-locking nut.
6. Loosely install the damper on the frame with the aligning tab facing inside, then loosely install the five flange nuts.
7. Install the damper fork over the driveshaft and onto the lower arm. Install the damper in the damper fork so the aligning tab is aligned with the slot
in the damper fork.
8. Hand-tighten the bolts and nuts.