CL V6-3.0L SOHC (VTEC) (1999)
Seat Heater Relay: Testing and Inspection
Seat Heater Control Relay
1. Remove the Seat. then remove the relay from the bottom of the seat.
2. Check for continuity between the relay terminals.
^
There should be continuity between No.1 and No.6 terminals, and the No.3 and No.4 terminals when power and ground are connected to the
No.6 and No.5 terminals.
^
There should be continuity between the No.6 and No.4 terminals when power is disconnected.