CL V6-3.2L SOHC (2002)
*5.
Remove the two steering wheel covers. Use a Torx T30 bit to remove the two Torx bolts, then throw the Torx bolts away. Unplug the horn wire,
and remove the driver's airbag.*
6.
1999-01 3.2TL and 2001-02 3.2CL models:
Unplug the connectors from the remote audio and cruise control switches.
2002-03 3.2TL and 2003 3.2CL models: Unplug the connectors from the remote audio and cruise control switches.
7.
Make sure the front wheels are aligned straight ahead.
8.
Remove the steering wheel nut/bolt. Make an alignment mark on the steering wheel shaft with a paint stripe.
9.
Using a commercially available steering wheel puller, release the steering wheel from the steering shaft. While pulling the steering wheel, note
these items: