CL V6-3.2L SOHC (2002)
Power Seat Control Module: Testing and Inspection
Driver's Power Seat Control Unit Input Test
Drivers Power Seat Control Unit Input Test
1. Remove the driver's power seat mounting bolts.
NOTE: Be careful not to scratch the interior trim.
2. Disconnect the connectors from the driver's power seat control unit (A).
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.