CL V6-3.2L SOHC (2002)
4. With the driver's multiplex control unit still disconnected, make these input tests at the connector or driver's under-dash fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 5.
5. Reconnect the driver's multiplex control unit to the driver's under-dash fuse/relay box, and perform the following input tests at the appropriate
connectors on the driver's under-dash fuse/relay box. For driver's under-dash fuse/relay box connector socket location.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
Multiplex Control Unit, Door:
6. Remove the driver's door panel, and disconnect the 20P connector from the door multiplex control unit.