CL V6-3.2L SOHC (2002)
2.
MDX only: Slide the front passenger's seat to the rear.
3.
Turn the ignition switch to ON (II).
4.
Open the door of the navigation unit.
5.
Press the EJECT button, and remove the client's DVD-ROM. Check if it is 2.05b or earlier.
^
If it is 205c, the update is not needed.
^
If it is 2.05b or earlier, go to step 6.
6.
Insert the patch CD with the writing side up. Close the door.
7.
Check that the navigation screen goes black for several seconds.
^
If a "DVD Read Error" message appears, go to step 5.
^
If the screen displays an "Updating Software" load progress bar, the system is operating properly. When you see a "Database Error" message,
go to step 16.
8.
Turn oft the ignition switch.
9.
MDX only: Slide the passenger's seat forward.
10.
Attach the SCS service connector to the navigation service check connector (located behind the navigation unit).
11.
Turn the ignition switch to ON (II).
12.
Verify that the "Diagnosis" menu for the picture diagnosis starts up and then changes to the "System Links" menu. Press the "Return" touch screen
button to access the "Diagnostic" menu.
13.
From the "Diagnostic" menu, press the "Unit Check" touch screen button.
14.
From the "Unit Check" menu, press the "Force Download" touch screen button.
NOTE:
