CL TYPE S V6-3.2L SOHC (2001)
Memory Positioning Module: Testing and Inspection
Control Unit Input Test
1. Before testing the driving position memory control functions, troubleshoot the multiplex control system.
Door Multiplex Control Unit:
2. Remove the driver's door panel.
3. Disconnect the connectors from the multiplex control unit, door.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.
5. With the door multiplex control unit still disconnected, make these input tests at the connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
Passenger's Multiplex Control Unit:
6. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box, and disconnect its connector.
