CL TYPE S V6-3.2L SOHC (2001)
Windshield Washer Relay: Testing and Inspection
Washer Motor Test
1. Remove the right inner fender.
2. Disconnect the 2P connector (A) from the washer motor(B).
3. Test the washer motor by connecting battery power to the No. 1 terminal and ground to the No. 2 terminal.
-
If the motor fails to run smoothly, replace it.
-
If the motor run smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged pump outlet
in the motor.
