Integra L4-1797cc 1.8L DOHC (VTEC) (1996)
13. Install the regulator.
NOTE: Make sure the connector is connected properly.
14. Install the glass.
15. Install the center channel guide and channel guide cover.
NOTE: Make sure the guide pin is installed in the center channel guide properly.
16. Roll the glass up and down to see if it moves freely without binding. Also make sure that there is no clearance between the glass and glass run
channel when the glass is closed. Adjust the position of the glass as necessary.
17. Attach the door harness to the door correctly.
18. Disconnect the power window switch from the door harness, then install the power window switch on the door panel.