Integra L4-1797cc 1.8L DOHC (VTEC) (1996)
Air Bag(s) Arming and Disarming: Service and Repair
Backprobing Spring-Loaded Lock Connectors
Backprobing Spring-loaded Lock connectors
When checking voltage or resistance on this type of connector the first time, it is necessary to remove the retainer to insert tester probes from the wire
side.
NOTE: It is not necessary to reinstall the removed retainer; the terminals will stay locked in the connector housing.
Backprobing Spring-loaded Lock connectors
To remove the retainer, insert a flat tip screwdriver between connector body and retainer, and carefully pry out the retainer.
NOTE: Take care not to break the connector.