Integra L4-1797cc 1.8L DOHC (VTEC) (1996)
Side Airbag (if equipped):
-
Disconnect the SRS floor harness 2P connector from the side airbag harness 2P connector.
NOTE: When disconnected, the airbag connector is automatically shorted.
Seat Belt Tensioner (if equipped):
- Remove the left and right "B" pillar trim panel.
- Disconnect both seat belt tensioner connectors from the left (driver's side) or right (front passenger's side) side wire harness.
NOTE: When disconnected, the seat belt tensioner connector is automatically shorted.
ARMING
1. Reconnect the airbag and tensioner's (if equipped) connector(s):
Driver's Side: