Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-3082001.png)
Wheel Sensor: Testing and Inspection
Front Pulser
-
Check the front and rear pulser for chipped or damaged teeth.
-
Measure the air gap between the wheel sensor and the pulser all the way around while rotating the hub bearing unit by hand.
Specs:
Standard Gap 0.4 - 1.0 mm (0.02 - 0.04 in)
NOTE: If the gap exceeds 1.0 mm (0.04 in), the probability is a distorted knuckle which should be replaced.
