Integra GS-R Sedan L4-1797cc 1.8L DOHC (VTEC) MFI (1999)
Variable Valve Timing Solenoid: Testing and Inspection
INSPECTION
1. Disconnect the 1P connector from the VTEC solenoid valve.
Resistance: 14 - 30 Ohms
2. Measure resistance between the terminal and body ground.
Resistance: 14 - 30 Ohms
3. If the resistance is within specifications, remove the VTEC solenoid valve from the cylinder head, and check the VTEC solenoid valve filter for
clogging.
-
If there is clogging, replace the engine oil filter and the engine oil.