Integra GS-R Sedan L4-1797cc 1.8L DOHC (VTEC) MFI (1999)
NOTE: Plug or cap the lines immediately after disconnecting them to avoid moisture and dust contamination.
5. Remove the two mounting bolts, then lift out the condenser as shown.
NOTE: Be careful not to damage the radiator and condenser fins when removing the condenser.
6. Install in the reverse order of removal, and:
-
if you're installing a new condenser, add refrigerant oil (ND-OIL 8: P/N 38897-PR7-A01AH or 38899 - PR7-A01) See: Service and
Repair/A/C Refrigerant Oil Replacement
-
replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them.
NOTE: Be sure to use the right O-rings for HFC 134a (R-134a) to avoid leakage.
-
do not damage the radiator and condenser fins when installing the condenser.
-
be sure to install the condenser mount cushions securely into the holes.
-
charge the system See: Service and Repair/Discharging & Evacuating System/Charging the System and test its performance See: Testing and
Inspection/Component Tests and General Diagnostics/Non-Trouble Code Procedures/Performance Test.