Integra GS Coupe L4-1834cc 1.8L DOHC MFI (1997)
WARNING: To prevent eye injury and burns when welding, wear an approved welding helmet, gloves and safety shoes.
6. Finish the welding section.
Smooth the mating surface with the windshield with a hammer and dolly.
7. Apply the sealer .
Apply sealer to the upper dashboard, pillars, etc.
8. Install the front fender and hood.
Check the front fender and hood for differences in level and clearance.
9. Apply the paint.
See Paint Repair section.
WARNING:
-
Ventilate when spraying paint. Most paint contains substances that are harmful if inhaled or swallowed. Read the paint label before
opening the paint container.
-
Avoid contact with skin. Wear an approved respirator, gloves, eye protection and appropriate clothing when painting.
-
Paint is flammable. Store it in a safe place, and keep it away from sparks, flames or cigarettes.
10. Apply anti-rust agent to the inside of the windshield lower and dashboard upper .
11. Install the related parts.
Install in the reverse order of removal.
NOTE: Take care not damage the windshield and the paint finishes.
12. Inspect and clean.
-
Check the windshield for water leaks.
-
After installing the dashboard, check the lights, gauges, etc. for proper operation.
-
Clean the interior.
