Integra GS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Power Door Lock Control Unit: Testing and Inspection
POWER DOOR LOCKS CONTROL UNIT / INPUT TEST
1. Remove the driver's door panel.
2. Disconnect the 14-P connector from the control unit.
3
Inspect the connector and socket terminals to be sure they are all making good contact.
*
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
*
If the terminals look OK, make the following in-put tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the control unit must be faulty; replace it.
Disconnect the 14-P connector form the power door lock control unit.
