acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Daytime Running Lamp Control Unit|Testing and Inspection|Page 127 > < Control Module HVAC|Testing and Inspection|Page 122
Page 1
background image

Daytime Running Lamp Control Unit: Testing and Inspection

DAYTIME RUNNING LIGHTS CONTROL UNIT / INPUT TEST

CAUTION:

All SRS wire harnesses are covered with yellow insulation. Before you disconnect any part of an SRS wire harness, disconnect the airbag connectors.

Whenever the ignition switch is ON, or has been turned OFF for less than three minutes, be careful not to bump the SRS unit; the airbags could
accidentally deploy and cause damage or injuries.

For additional precautions, refer to the SRS section See: Restraint Systems/Service Precautions. 

1. Remove the dashboard lower cover and knee bolster.
2. Disconnect the connectors from the daytime running lights control unit.

Daytime Running Lamp Control Unit|Testing and Inspection|Page 127 > < Control Module HVAC|Testing and Inspection|Page 122