Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Install Pin Boots
5. Install the pin boots into the groove in the pins properly.
6. Install the brake pad retainers and brake pads.
7. Align the cutout in the piston with the tab on the inner pad.
8. Install the caliper on the caliper bracket, and tighten the caliper mounting bolts.
Banjo Bolt And Sealing Washers
9. Connect the brake hose to the caliper with new sealing washers, and tighten the banjo bolt.
Specs
- Caliper Bracket Mounting Bolts 38 Nm (28 lb. ft.)
- Banjo Bolts 34 Nm (25 lb. ft.)
- Caliper Mounting Bolts 23 Nm (17 lb. ft.)