Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
7. Install the main bearings/caps and cap bridge (B18C1, B18C5 engines only).
NOTE: Coat the bolt threads with oil.
8. Check clearance with plastigage , then tighten bearing cap bolts in 2 steps.
1st step: 29 Nm (22 ft. lbs.)
2nd step:
B18B1 engine: 76 Nm P.8 kgf.m,56 ft. lbs.)
B18C1, B18C5 engines:
No.1, 5 cap bolts: 73 Nm (56 ft. lbs.)
No.2, 3, 4 cap bolts: 64 Nm (49 ft. lbs.)
Bearing Cap Bolts Torque Sequence
Torque Sequence
B18B1 engine: