Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
* TOOL INFORMATION*
REQUIRED MATERIALS
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Inspect Idle Speed (L4 and V6 Models)
Operation Number:
120301
Flat Rate Time:
0.6 hour
Failed Part:
P/N 16400-PAA-A61
Defect Code:
093
Contention Code:
C05
Skill Level:
Repair Technician
Clean Throttle Body (V6 Models Only)
Operation Number:
216001
Flat Rate Time:
0.6 hour
Failed Part:
P/N 16400-PAA-A61
Defect Code:
030
Contention Code:
B99
Skill Level:
Repair Technician
Warranty claims for these labor operations must be submitted separately. Do not combine them on the same claim.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
INSPECTION PROCEDURE A: L4 MODELS
1.
Access the air bleed screw on the throttle body.
2.
Record the current setting of the screw:
^
Turn the screw clockwise, and count the number of turns (both full and partial) it takes to fully seat the screw.
^
Turn the screw counterclockwise back to its original setting.
^
Subtract the number of clockwise turns it took to seat the screw from 3-1/2. Record that number. Example: If it took two full turns to seat the
screw, subtracting 3-1/2 from that gives you 1-1/2.