Integra RS Coupe L4-1834cc 1.8L DOHC MFI (1998)
7. Check for continuity between the terminals in each switch position according to the table.
-
If it matches the table, the switch is OK, replace the cable reel.
-
If there is no continuity in one or both positions, replace the switch.
8. If all tests prove OK, reinstall the set/resume switch.
9. Reconnect the driver's airbag connectors, and reinstall the access panel on the steering wheel.
10. Reconnect the front passenger's airbag connector, and reinstall the glove box.
11. Connect the battery positive cable, then connect the negative cable.
12. After installing the airbag assembly, confirm that the SRS indicator light should come on for about 6 seconds and then go OFF with the ignition
switch ON (II).
