Integra RS Coupe L4-1834cc 1.8L DOHC MFI (1998)
NOTE: The numbers after the part names show the quantities of the parts used.
8. Set the rear window, then center it in the opening. Make alignment marks across the rear window and body with a grease pencil at the four points
shown.
9. Remove the rear window.
10. With a sponge, apply a light coat of glass primer around the edge of the rear window as shown, then lightly wipe it off with gauze or cheesecloth.
NOTE:
-
Do not apply body primer to the rear window, and do not get body and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the rear window properly, causing a leak after the
rear window is installed.