Integra RS Sedan L4-1834cc 1.8L DOHC MFI (1997)
14. Remove the hub unit from the steering knuckle. Refer to Steering and Suspension. See: Steering and Suspension/Steering/Front Steering
Knuckle/Service and Repair
INSTALLATION
1. Install the hub unit, spindle washer and brake disc.
NOTE:
-
Wash the bearing and spindle thoroughly in high flash point solvent before reassembly.
-
Before installing the brake disc, clean the mating surfaces of the rear hub and the brake disc.
2. Install the brake caliper with the caliper bracket mounting bolts.
3. Install the brake hose with the brake hose mounting bolt.
CAUTION: Be careful not to twist the hose more than necessary