MDX V6-3.7L (2007)
Yaw Rate Sensor: Service and Repair
Yaw Rate-Lateral/Longitudinal Acceleration Sensor Replacement
NOTE:
^
Do not damage or drop the sensor as it is sensitive.
^
Do not use power tools.
1. Turn the ignition switch OFF.
2. Remove the driver's center console trim.
3. Disconnect the yaw rate-lateral/longitudinal acceleration sensor 4P connector (A).
4. Remove the sensor mounting nuts, and remove the yaw rate-lateral/longitudinal acceleration sensor (B).
5. Install in the reverse order of removal.
6. Do the yaw rate-lateral/longitudinal acceleration neutral position memorization.
