MDX V6-3471cc 3.5L (2002)
Air Bag(s) Arming and Disarming: Technician Safety Information
Wiring Precautions
Wiring Precautions
SRS wiring can be identified by special yellow outer covering (except the SRS indicator light circuit).
Observe the instructions described in this section.
-
Never attempt to modify, splice, or repair SRS wiring. If there is an open or damage in SRS wiring, replace the harness.
-
Be sure to install the harness wires so they do not get pinched or interfere with other parts.
-
Make sure all SRS ground locations are clean, and grounds are securely fastened for optimum metal-to-metal contact. Poor grounding can cause
intermittent problems that are difficult to diagnose.