MDX V6-3471cc 3.5L (2002)
Map Light: Testing and Inspection
Rear
Rear Individual Map Lights Test
1. Turn the light switch OFF.
2. Carefully pry off the lens (A) with a small screwdriver.
3. Remove the two mounting screws.
4. Disconnect the 3P connector (B) from the housing (C).
5. Check for continuity between the terminals.
-
There should be continuity between the No.1 and No.3 terminals with the left switch ON.
-
There should be continuity between the No.1 and No.2 terminals with the right switch ON.
6. If the continuity is not as specified replace the light.