MDX V6-3471cc 3.5L (2002)
1.
Replace the PCM:
^
To rewrite the new PCM, refer to page 7 of Service Bulletin 00-019, Immobilizer System (Type 2).
^
Remove the passenger's center console side trim.
^
Remove the bolt from the intake manifold runner control (IMRC) module.
^
Remove the two nuts from the IMRC module bracket.
^
Remove the bolt and nut that secure the PCM, then remove the PCM.
^
Install the new PCM in reverse order of removal.
2.
Remove the transmission.
^
Refer to page 14-138 of the 2001-02 MDX Service Manual, or
^
Online, enter keyword A/T REM, and select A/T Removal from list.
3.
Clean the transmission cooler. Refer to Service Bulletin 89-015, ATF Cooler Cleaner.
4.
Install a remanufactured transmission:
^
Refer to page 14-149 of the 2001-02 MDX Service Manual, or
^
Online, enter keyword A/T INSTALL, and select A/T Installation from list.
Disclaimer