MDX V6-3471cc 3.5L (2002)
NOTE: When tightening the Torx bolts to the specified torque, be careful to turn them in so that their heads rest squarely on the brackets.
2. Install the center console garnish.
3. Reconnect the driver's and front passenger's airbag connectors.
4. Reconnect the side airbag connectors.
5. Reconnect both seat belt tensioner connectors.
6. Reconnect the battery negative cable.
7. Initialize the OPDS unit.
8. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator light should come on for about
6 seconds and then go off.
