MDX V6-3471cc 3.5L (2002)
Air Bag: Service and Repair
Disconnecting and Connecting Connectors
Back-Probing Spring Loaded Lock Connector
Backprobing Spring-loaded Lock connectors
When checking voltage or resistance on this type of connector the first time, it is necessary to remove the retainer to insert tester probes from the wire
side.
NOTE: It is not necessary to reinstall the removed retainer; the terminals will stay locked in the connector housing.
Backprobing Spring-loaded Lock connectors
To remove the retainer, insert a flat tip screwdriver between connector body and retainer, and carefully pry out the retainer.
NOTE: Take care not to break the connector.
Spring-Loaded Lock Connector / Front Airbag Connectors
Disconnecting
To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector