MDX V6-3471cc 3.5L (2002)
8. Disconnect the SRS main harness 2P connector (A) from the cable reel 2P connector (B), then disconnect the dashboard harness 4P connector (C)
from the cable reel (D).
9. Remove the screws (A) from the cable reel, then remove the cable reel from the column.
Installation
1. Before installing the steering wheel, align the front wheels straight ahead.
2. If not already done, disconnect the battery negative cable, and wait at least 3 minutes.
3. Set the cancel sleeve (A) so the projections (B) are aligned vertically.