MDX V6-3471cc 3.5L (2002)
Clutch Control Solenoid Valve: Testing and Inspection
A/T Clutch Pressure Control Solenoid Valve C Test
Test
1. Disconnect the connector from A/T clutch pressure control solenoid valve C.
2. Measure A/T clutch pressure control solenoid valve C resistance at the solenoid valve connector.
STANDARD: About 5.0 Ohms
3. If the resistance is out of standard, replace A/T clutch pressure control solenoid valve C.
4. Connect the No. 1 terminal of A/T clutch pressure control solenoid valve C to the battery positive terminal, and connect the No. 2 terminal to the
battery negative terminal. A clicking sound should be heard. Remove A/T clutch pressure control solenoid valve C if no sound is heard.
5. Check the fluid passage of A/T clutch pressure control solenoid valve C for dust and dirt.
6. Connect the No 1 terminal of A/T clutch pressure control solenoid valve C to the battery positive terminal, and connect the No. 2 terminal to the
battery negative terminal. Make sure A/T clutch pressure control solenoid valve C moves.
7. Disconnect one of the battery terminals and check valve movement.
NOTE: You can see valve movement through the fluid passage in the mounting surface of the body (A).
8. If the valve binds or moves sluggishly, or if the solenoid does not operate, replace A/T clutch pressure control solenoid valve C.
