NSX-T V6-3.2L DOHC (VTEC) (1997)
Windshield Washer Relay: Testing and Inspection
High Relay/Washer Relay Test
High Relay/Washer Relay Test
1. Remove the wiper high relay or the washer relay from under-hood relay box B.
2. Check continuity at the relay terminals.
^ There should be continuity between the C and D terminals.
^ There should be continuity between the A and B terminals when power and ground are connected to the C and D terminals.
^ There should be no continuity between the A and B terminals when power is disconnected.
Wiper High Relay
Wiper high relay
Washer Motor Relay
Washer motor relay