NSX-T V6-3.2L DOHC (VTEC) (1997)
4. Select a new shim from the chart above.
NOTE: Identification color is painted on the side of the shim.
5. Apply liquid gasket to both sides of the linear solenoid shim as shown. Use liquid gasket Part No. 08718-0001.
CAUTION:
-
Install the linear solenoid within 10 minutes of applying the liquid gasket.
-
After installation, wipe off any liquid gasket that squeezed out from around the linear solenoid shim.
NOTE:
-
Check that the mounting surfaces are clean and dry before applying liquid gasket. Degrease if necessary.
-
Apply the liquid gasket evenly.
-
Do not install the pants if 10 minutes or more has passed since you first applied the liquid gasket. If 10 minutes has passed, reapply liquid
gasket after removing the residue.
-
Wait at least 30 minutes before filling with ATF.
6. Install the linear solenoid and the shim to the transmission housing.