NSX V6-3.0L DOHC (VTEC) (1998)
A/T Gear Position Switch: Testing and Inspection
1. Remove the front console, then disconnect the 12P connector from the A/T gear position switch.
A/T Gear Position Switch Test
2. Check for continuity between the terminals in each switch position according to the table.
-
Move the lever back and forth at each position without touching the push button, and check for continuity within the range of free play of the
shift lever.
-
If there is no continuity within the range of free play, adjust the position of the A/T gear position switch.