NSX V6-3.0L DOHC (VTEC) (1998)
Mode B
9. Disconnect the driver's airbag 3P connector from the cable reel, then connect test harness C to the driver's airbag 3P connector.
Mode B
10. Check continuity between the No. 7 terminal and body ground, and between the No. 8 terminal and body ground.
-
If there is continuity, the driver's airbag inflator is faulty.Replace it and recheck the voltages according to the chart.
-
If there is no continuity, the cable reel is faulty.Replace it and recheck the voltages according to the chart.
Mode B
11. Disconnect the passenger's airbag 3P connector from the SRS main harness, then connect test harness C to the airbag side of the connector.