RDX L4-2.3L Turbo (2008)
7. Install the A/C condenser in the reverse order of removal, and note these items:
-
If you're installing a new A/C condenser, add refrigerant oil (SP-10).
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the correct
O-rings for HFC-134a (R-134a) to avoid leakage.
-
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
-
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately.
-
Charge the system.
