RDX L4-2.3L Turbo (2008)
Control Unit: Service and Repair
SH-AWD Control Unit Replacement
NOTE: The SH-AWD control unit must be initialized after replacement, otherwise the SH-AWD system will not function.
1. Remove the rear left side trim panel cover (A).
2. Loosen the SH-AWD control unit mounting bolts (A), then remove the SH-AWD control unit (B).
3. Disconnect the SH-AWD control unit connectors (C).
4. Install the SH-AWD control unit in the reverse order of removal.
