RDX AWD L4-2.3L Turbo (2010)
Differential Temperature Sensor/Switch: Service and Repair
Rear Differential Fluid Temperature Sensor Replacement
1. Drain the differential fluid, and reinstall the drain plug with a new sealing washer See: Transmission and Drivetrain/Differential Assembly/Service
and Repair/Removal and Replacement/Rear Differential Fluid Inspection and Replacement.
2. Remove the rear differential fluid temperature sensor cover (A) and the rear differential fluid temperature sensor harness bracket D, then
disconnect the rear differential fluid temperature sensor 2P connector (B).
3. Remove the rear differential fluid temperature sensor (C).
4. Install the rear differential fluid temperature sensor with a new O-ring (E) in the reverse order of removal.
5. Refill the differential with the recommended fluid See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Removal and
Replacement/Rear Differential Fluid Inspection and Replacement.