RDX AWD L4-2.3L Turbo (2010)
Drive/Propeller Shaft: Testing and Inspection
Propeller Shaft Inspection
Universal Joint and Boots
1. Move the shift lever to N.
2. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
3. Check the center support bearing (A) for excessive play or noise. If the center support has excessive play or noise, replace the propeller shaft
assembly.
4. Check the rubber portion (B) of the center support bearing for damage and deterioration. If the rubber portion is damaged or deteriorated, replace
the propeller shaft assembly.
5. Check the universal joints for excessive play or noise. If the universal joints have excessive play or noise, replace the propeller shaft assembly.
Propeller Shaft Runout
1. Move the shift lever to N.
2. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
3. Install a dial indicator with its needle on the center of the No. 1 propeller shaft or the No. 2 propeller shaft.
4. Turn the other propeller shaft slowly and check the runout. Repeat this procedure for the other propeller shaft.