RL V6-3.5L (2007)
Repairs and Inspections Required After a Collision: Service and Repair
SRS Component Replacement / Inspection After Deployment
Component Replacement/Inspection After Deployment
NOTE: Before doing any SRS repairs, use the HDS SRS menu method to check for DTCs; refer to the DTC Troubleshooting Index See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Descriptions for the less obvious deployed parts (seat
belt tensioners, front impact sensors, side airbag sensors, etc.)
After a collision where the seat belt tensioners deployed, replace these items:
-
SRS unit
-
Seat belt tensioners
-
Front impact sensors
After a collision where the front airbags) deployed, replace these items:
-
SRS unit
-
Deployed airbag(s)
-
Seat belt tensioners
-
Front impact sensors
After a collision where the side airbag(s) deployed, replace these items:
-
SRS unit
-
Deployed side airbag(s)
-
Reinforcing cloth rear hooks
-
Side impact sensor(s) (first) for the side(s) that deployed
-
Side impact sensor(s) (second) for the side(s) that deployed
-
B-pillar lower trim
After a collision, where a side curtain airbag has deployed, replace all trim clips on that side, even if they appear to be undamaged. Replace the clips on
these parts:
-
SRS unit
-
Deployed side curtain airbag(s)
-
Seat belt tensioner(s) for the side(s) that deployed
-
Side impact sensor(s) (first) for the side(s) that deployed
-
Side impact sensor(s) (second) for the side(s) that deployed
-
Rear safing sensor
-
Roof trim
-
A-pillar trim
-
B-pillar trim
-
C-pillar trim
-
Front grab handle
-
Rear grab handle
-
All related trim clips
-
Sunvisor