RL V6-3.7L (2009)
Trunk / Liftgate Solenoid: Testing and Inspection
Trunk Lid Opener Solenoid Test
1. Remove the trunk rear trim panel. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Interior Trim Removal/Installation - Trunk Area
2. Disconnect the 5P connector (A) from the trunk lid latch switch/trunk lid opener solenoid (B).
3. Check solenoid operation by connecting power to the terminal No. 4 and ground the terminal No. 5 momentarily.
NOTE: To prevent damage to the solenoid, apply battery voltage momentarily.
4. If the solenoid does not actuate, replace it.