RL V6-3.7L (2009)
Braking Sensor/Switch: Testing and Inspection
Brake Pedal Position Switch Test
1. Disconnect the 4P connector (A) from the brake pedal position switch (B).
2. Check for continuity between the terminals No. 1 and No. 2.
-
There should be continuity when the brake pedal is pressed.
-
There should be no continuity when the brake pedal is released.
3. Check for continuity between the terminals No. 3 and No. 4.
-
There should be no continuity when the brake pedal is pressed.
-
There should be continuity when the brake pedal is released.
4. If necessary, adjust or replace the switch, or adjust the pedal height. See: Brake Pedal Assy/Adjustments