RL V6-3.7L (2009)
Backup Lamp: Service and Repair
Back-up Light Replacement
Bulb Replacement
1. Open the trunk lid, and remove the maintenance lid.
2. Disconnect the 2P connector (A) from the back-up light bulb socket (B).
3. Turn the bulb socket 45 ° counterclockwise to remove it from back-up light housing.
4. Install a new bulb in the reverse order of removal.
Replacement
1. Open the trunk lid, and remove the trunk lid trim. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Interior Trim Removal/Installation - Trunk Lid
2. Disconnect the 2P connector (A).
3. Remove the bolt and nut, then remove the back-up light (B).
4. Install the parts in the reverse order of removal.