RL V6-3.7L (2009)
Crankshaft Position Sensor: Service and Repair
CKP Sensor Replacement
1. Move the auto-tensioner to remove tension from the drive belt, then remove the belt. See: Engine, Cooling and Exhaust/Engine/Timing
Components/Timing Belt/Service and Repair/Timing Belt Removal
2. Remove the crankshaft pulley. See: Engine, Cooling and Exhaust/Engine/Cylinder Block Assembly/Harmonic Balancer - Crankshaft
Pulley/Service and Repair
3. Remove the upper and lower timing belt covers from the engine. See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing
Belt/Service and Repair/Timing Belt Removal
4. Remove CKP sensor A/B (A) from the oil pump.
5. Install the parts in the reverse order of removal.
6. Clear the CKP pattern with the HDS.
7. Do the CKP pattern learn procedure. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview