RL V6-3474cc 3.5L (1998)
Pressure Regulating Solenoid: Testing and Inspection
Test
1. Disconnect the transmission sub-harness connector (14P).
2. Measure the resistance between the No. 8 and No. 9 terminals of the transmission sub-harness connector.
STANDARD: 4.0 - 6.0 Ohms (at 70°F, 20°C)
3. If the resistance is out of specification, remove the shift cable cover, and disconnect the shift solenoid valve/A/T clutch pressure control solenoid
valve harness connector.