RSX L4-2.0L (2005)
10. After the MVCI has copied the files, a confirmation screen appears. Press ENTER to update the control unit/module, or press ESC to exit.
11. Wait for the MVCI to update the control unit/ module.
12. After the MVCI finishes updating the control unit/ module, turn the ignition switch to LOCK (0) when directed by the MVCI.
13. Turn the ignition switch back to ON (II) within 60 seconds to complete the updating procedure.
NOTE:
The MVCI has a countdown timer. If you do not turn the ignition switch to ON (II) within 60 seconds, the MVCI sets an error code.