RSX L4-2.0L (2005)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
Updating With the MVCI
*UPDATING WITH THE MVCI
Make sure you have the latest control module (CM) Update software loaded from your HDS PC to your MVCI. For loading instructions and other
details, refer to the MVCI User Guide on ISIS. The Database Update version appears when you select Reprogramming, then press ENTER.
1. Connect the DLC cable to the MVCI and to the vehicle's DLC.
2. Turn the ignition switch to ON (II). The MVCI automatically boots up.*
3. Press the ENTER button on the MVCI to see the User Config menu. Select CM Update Mode.
4. Select Reprogramming, then press ENTER.
NOTE:
Use these MVCI default settings:
Setting 1-
Destination: USA
Language: American English
Setting 2 -
Auto Detect: Yes
Continuous Mode: No
For more information on these settings, refer to the MVCI User Guide.
5. The CM Update software information appears. Press ENTER to continue.
NOTE:If the Database Update is an earlier version than the one listed in an Acura service communication (service bulletin, product update, iN
message, etc.), press ESC, then update your MVCI before continuing.