RSX L4-2.0L (VTEC) (2002)
/Page-5279001.png)
Cruise Control Switch: Service and Repair
Cruise Control Set/Resume/Cancel Switch Test/Replacement
Set/Resume/Cancel Switch Test/Replacement
1. Remove the two screws, then remove the switch.
2. Check for continuity between the terminals in switch position according to the table.
-
If there is continuity, and it matches the table, but switch failure occurred on the cruise control unit input test, check and repair the wire harness
on the switch circuit.
-
If there is no continuity in one or both positions, replace the switch.
